|
|
|
Dallas–Fort Worth, TX Press Releases
|
(Dallas.CityRegions.Com, October 04, 2018 ) This report presents the worldwide Pipe Wrenches market size (value, production and consumption), splits the breakdown (data status 2013-2018 and forecast to 2025), by manufacturers, region, type and application.
This study also analyzes the market status, market share, growth rate, future trends, market drivers, opportunities and challenges, risks and entry barriers, sales channels, distributors and Porter's Five Forces Analysis.
The pipe wrench (US), Stillson wrench or Stillsons (UK) is an adjustable wrench used for turning soft iron pipes and fittings with a rounded surface. The design of the adjustable jaw allows it to lock in the frame, such that any forward pressure on the handle tends to pull the jaws tighter together. Teeth angled in the direction of turn dig into the soft pipe. They are not intended for use on hardened steel hex nuts or other fittings because they would ruin the head; however, if a hex nut is soft enough that it becomes rounded beyond use with standard wrenches, a pipe wrench is sometimes used to break the bolt or nut free. Pipe wrenches are usually sold in the following sizes (by length of handle): 10, 12, 14, 18, 24, 36, and 48 inches, although smaller and larger sizes are available as well. They are usually made of cast steel. Today, aluminum is also used to construct the body of the wrench, while the teeth and jaw remain steel. Teeth, and jaw kits (which also contain adjustment rings and springs) can be bought to repair broken wrenches, as this is cheaper than buying a new wrench.
Request Sample Report @ http://www.orbisresearch.com/contacts/request-sample/2330184
First, as for the global Pipe Wrenches industry, the industry concentration rate is not high. The top 5 manufacturers have 41.32% sales revenue market share in 2016. The Stanley Black & Decker which has 12.68% market share in 2016, is the leader in the Pipe Wrenches industry. The manufacturers following Stanley Black & Decker are TTI Group and Apex Tool Group, which respectively has 8.18% and 7.37% market share globally.
Second, the global consumption of Pipe Wrenches products rises up from 9002 units in 2012 to 11486 units in 2016, with an average annual growth rate of 6.90%. At the same time, the revenue of world Pipe Wrenches sales market has a rise from 541.90 m dollars to 635.91 m dollars. The reason causes this increase is the growing demand for the Pipe Wrenches products, which is the result of the spurring needs of downstream customers.
Third, as for the Pipe Wrenches market, it will still show optimistic trend, and technological trends in the market will stay stable.
The Pipe Wrenches market was valued at 670 Million US$ in 2017 and is projected to reach 850 Million US$ by 2025, at a CAGR of 3.0% during the forecast period. In this study, 2017 has been considered as the base year and 2018 to 2025 as the forecast period to estimate the market size for Pipe Wrenches.
Browse Complete Report@ http://www.orbisresearch.com/reports/index/global-pipe-wrenches-market-insights-forecast-to-2025
The following manufacturers are covered in this report:
Stanley
RIDGID
TTI Group
Apex Tool Group
SNAP-ON
Irwin
REED
Stahlwille
Wiha Tools
Wheeler-Rex
Pipe Wrenches Breakdown Data by Type
Small Size (Length?200 mm)
Medium Size (200 mm
Larger Size (Length?800 mm)
Pipe Wrenches Breakdown Data by Application
Petrochemical Pipeline
Civil Pipeline
Others
Enquiry Before Buying@ http://www.orbisresearch.com/contacts/enquiry-before-buying/2330184
Some Points From Table of Content:
Chapter One: Study Coverage
Chapter Two: Executive Summary
Chapter Three: Market Size by Manufacturers
Chapter Four: Pipe Wrenches Production by Regions
Chapter Five: Pipe Wrenches Consumption by Regions
Chapter Six: Market Size by Type
Continued…
About Us:
Orbis Research (orbisresearch.com) is a single point aid for all your market research requirements. We have vast database of reports from the leading publishers and authors across the globe. We specialize in delivering customized reports as per the requirements of our clients. We have complete information about our publishers and hence are sure about the accuracy of the industries and verticals of their specialization. This helps our clients to map their needs and we produce the perfect required market research study for our clients.
Contact Us:
Hector Costello
Senior Manager – Client Engagements
4144N Central Expressway,
Suite 600, Dallas,
Texas - 75204, U.S.A.
Phone No.: +1 (214) 884-6817; +9120641 01019
Email id: sales@orbisresearch.com
Orbis Research
Hector Costello
+1 (214) 884-6817
sales@orbisresearch.com
Source: EmailWire.Com 
|
|
|
|
